how to program saab 9-3 key fob to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of steps that are unique to add an additional ignition key. It requires dealer support using an electronic handheld computer called Tech-2. Then a new key as well as transponder have to be purchased and then programmed into the car.

Rotate your keys to stop one from wearing out quicker than the next. This will also ensure that your keys remain in pristine condition.

Replacement Case

As opposed to the traditional saab 9-3 Key keys of the past, the new key fobs are equipped with electronics which makes it difficult to copy. This has made theft of cars a lot more complicated than it was 20 years ago. However, it has also made the replacement of lost keys a much more expensive endeavor.

Every owner of a Saab 9-3 should have at least two functioning keys. If one is lost, it costs a fortune to add another to the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers will typically charge $100-$200 for this.

There are ways to reduce these costly costs. Some parts suppliers will search for the code from a spare key (usually the same one that opens the doors and turns on the ignition) and cut a brand new key blade out of metal for a fraction of the dealer's cost. The key must, however, be identical to the original one in order to function in your car.

Follow these steps to replace the case. You'll need a flathead screwdriver along with some patience. Utilizing the screwdriver, slowly pry the plastic apart and remove the emergency key from the case. Once the case is opened, take out the electronics and put them in your new case. Make sure you insert the correct key and badge into the case.

Replacement Battery

The Saab 9-3 replacement battery is a cheap part that can be quickly and easily replaced. The YouTube video of Cyclone Cyd demonstrates the procedure for replacing the remote fob battery in just four simple steps. This tutorial can be used with any modern Saab key fob. However, the process might differ slightly.

This button is usually placed close to the Saab logo on the back of the fob. This is usually located next to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver through the small hole on this button. This should be enough to allow you to open the fob case so that you can change the battery.

Once you have installed the batteries CR1632, it is possible to rebuild the remote key fob. You can then program it into your car. The entire process should take no more than an hour or less. It's a very easy procedure that doesn't require any special equipment.

The process can be a bit more complicated in the event that you lose your key, but it is possible. The dealer has to determine the VIN of the car and then purchase a replacement key blade and TWICE module with the proper unique code. The dealer will then have to program the key using MDI an innovative software tool.

Replacement Key Fob

The key fob comes with batteries that are used to lock and unlock your vehicle. Batteries have a limited lifespan and will eventually die. This is a typical issue that affects all cars and the good news is that you can replace the batteries in most key fobs and not have to replace the whole case. Amazon sells replacement fobs that have all the electronic components installed. You can simply open the case and replace the batteries. It is necessary to remove the emergency key before you replace the batteries. To do this, place a small screwdriver that is flat into the slot that is in the middle. Use the screwdriver to move around the case, and it should split open, making it much easier to remove.

If you're looking to replace your keys, make sure you have a spare in your possession. This will save you a significant amount of money. If you have a spare you can ask the dealer to cut an additional key and program it to your car, which is cheaper than replacing the entire key fob.

It is possible to add another key to your vehicle even if you don't have one, but it requires an extensive amount of research and work. The cost for adding a second key is around a hundred dollars and it also requires the programming of the car's computer. Professionals can accomplish this, but it's an expensive option.

Replacement Ignition

The current SAAB 9-3 is an advanced alarm system built on a keycode. This means that should you lose only one working key, replacing it with another one can be very expensive since the car has to have a special computer module fitted and must also be specifically programmed to accept an additional key. Dealers can charge hundreds of dollars to program the new key when they are not able to complete the task.

Dealers will charge you top dollar to replace your car's computer (also called the CIM or SAAB twice) in the event that you lose the only working key. We can reprogramme the existing EEPROM on your car's computer so that it is ready for an additional key. This will save you more than 50% on the cost you pay the dealer.

If you've been a long-time owner of a 03-11 saab 93 replacement key 9-3, then you probably are aware that the ignition key isn't all that robust. If the ignition key you have isn't functioning properly, you must think about replacing it. They can become extremely sticky and the buttons have been known to fall off. It's not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be done quickly.